carpet cleaning equipment extraction::It uses hot water and lowfoaming cleaning agent for regular cleaning of carpets carpet cleaning equipment extraction

carpet cleaning equipment extraction::It uses hot water and lowfoaming cleaning agent for regular cleaning of carpets.
If the carpet has been previously shampooed with a dry foam shampoo, the extractor should be used without adding a detergent to the hot water.
This rinses out the shampoo residue and buildup and carries the soil away as before; however, the foam must be reduced in the pickup tank by using a defoaming product.
The extractor method wets the carpet less than a shampoo procedure but a little more than the yarn pad method.
Remove by hand obvious accumulations of soil, such as gum, candy and other loose objects.
Move as much furniture as possible from the area.
Test fabric for color fastness or possible damage from the detergent or spotter in an outoftheway area.
Treat spots and stains with special spotters.
Thoroughly vacuum to remove all loose dirt.
Overlap so there is little chance of soil being missed.
As in all cleaning procedures, the first step is to gather the recommended janitorial equipment and supplies together and bring to the area to be cleaned.
Fill extractor solution tank with 24 ounces of extractor detergent per gallon of hot water.
Follow directions for heat control and other necessary operating settings.
To clean, place wand at a comfortable distance in front of you so the triangular tool is perpendicular to the carpet.
Return tool to same spot and vacuum the damp area until soil or water can no longer be seen entering the pickup tank.
Do not overwet carpet.
After extraction, vacuum with no solution being applied, in one direction with the grain.
Arrange the best possible drying conditions and keep all traffic and furniture off until completely dry.
Then vacuum once again to lift the pile and remove any residue of loosened soil on the pile.
If furniture with metal tips must be replaced on carpet that is not completely dry, insert cardboard, plastic or aluminum strips underneath to prevent rust marks.
Allow time to clean up and return the cleaning equipment to the storage area.
carpet cleaning equipment extraction::This loosens up the dirt that is
on the top and deep in the carpet carpet cleaning equipment extraction